Medicube AGE-R BOOSTER PRO EX | 6-in-1 Glass Skin Total Care Device

Enjoy professional-level skincare in the comfort of your own home with MEDICUBE’s AGE-R Booster Pro, a 6-in-1 total-care device that uses the latest skincare technology to help you achieve your skin goals. With four easy-to-use modes, it uses electroporation, microcurrents, EMS, electric needles, LED, and sonic vibrations to improve skincare absorption, boost radiance, firmness, and elasticity, and minimize the appearance of pores.

You can use the device in one of four ways after applying your favorite serum and moisturizer (no need for a conductive gel!):

• Booster mode (Electroporation): The Booster mode uses Electroporation to create temporary passageways into the skin and allow active skincare ingredients to penetrate deeper for maximum, glow-boosting effectiveness. Studies show this mode to increase skin permeability.
• MC mode (Microcurrents): The MC mode helps to volumize and plump up the skin, softening the appearance of fine lines and wrinkles around the eyes and mouth. Studies show this mode improves forehead volume and helps soften the appearance of wrinkles.
• Derma Shot mode (EMS): The Derma Shot mode helps to firm and define skin by stimulating the facial muscles with mid-frequency EMS.
• Air Shot mode (Electric needles): The Air Shot mode helps to improve pore elasticity by creating non-damaging passageways into the skin with electric needles.

Choose the mode that best caters to your specific skincare concerns.

This device also uses 5 types of LED to achieve different skin goals:

• Blue LED has a wavelength of 455-492nm and helps with pore care and sebum control.
• Orange LED has a wavelength range of 597-622nm and helps to brighten skin and boost radiance.
• Green LED has a wavelength range of 492-577nm and helps to increase skin volume.
• Red LED has a wavelength range of 622-780nm and helps to encourage greater skin elasticity.
• Purple LED has a wavelength range of 390-455nm and helps to improve the absorption of active skincare ingredients.

Note: These LED colors are preset according to the mode in which you are using the device.

This device is equipped with a skin contact sensor that emits LED light only when it touches the skin. It is suitable for all skin types.

The above information is based on information shared by the brand.

This device uses electrical microcurrents, so it is important to use it with caution. Please read the usage instructions and warnings below before you start using this product.

💖 Achieve your glass skin goals with innovative technology.
🌟Enjoy enhanced absorption, radiance, elasticity, pore care, and customized LED care.
💧No conductive gel required.
🍃Easy to use: perfect for your daily skincare routine.
📱Maximize Your Results with the AGE-R App.

1. Press and hold the power button to turn on the device.
2. Press the mode button briefly to select your desired mode (Booster Mode/MC Mode/Derma Shot Mode/Air Shot Mode).
3. After selecting the mode, use the power button to choose the level you want (1-5 levels available).
4. After selecting the mode and level, follow the usage instructions for the chosen mode:
   

*Important Notes:

- When using the product for the first time, start from level 1 and gradually increase the level.

- After using each mode for 5 minutes, the mode change standby screen will be displayed.

If the device is left idle, it will automatically turn off after 10 seconds.

*Conect Bluetooth

1. Turn on the device.

2. With the device turned on, run the [AGE-R] app on your phone.

3. Click [Connect to Booster Pro] -> [Next].

4. Press the connect button to connect the device and app. Please select the device with the highest connection signal at the top.

*Metal

Ingredients are subject to change at the manufacturer's discretion.

*Metal

Ingredients are subject to change at the manufacturer's discretion.